The Coram Coratech Quadrant Shower Tray 800mm x 800mm is constructed from a revolutionary resin formulation developed exclusively by Coram Showers.
The Coratech resin has all the strength of traditional stone resin shower trays, but without the excessive weight.
The Coram Coratech Quadrant Shower Tray 800mm x 800mm is supplied complete with a designer chrome domed shower trap, adjustable legs and panels.
Coram Shower Tray Specifications:
|
Internal Length (mm)
|
800
|
|
Internal Width (mm)
|
800
|
|
External Length (mm)
|
824
|
|
External Width (mm)
|
824
|
|
Radius (mm)
|
550
|
|
Height (mm)
|
185
|
|
Weight (kg)
|
13.5
|
Coram Shower Tray Features and Benefits:
CORAM SHOWER TRAY CROSS-SECTIONAL DIAGRAM
1. Upstand
2. Hard-wearing non-slip acrylic surface with the strength and rigidity of a resin base
3. Unique Coratech Resin
4. Factory-fitted legs
5. Detachable push-fit panels
6. Easy-to-adjust threaded feet with angled screw fixings
CORAM SHOWER TRAY BENEFITS
For solid floors or similar site conditions where plumbing connections cannot be recessed into the floor, a riser shower tray offers an easy, lowe-cost alternative to building a plinth.
The plumbing connections are concealed beneath the tray, which offers easy access via the removable panels.
LIFETIME GUARANTEE AVAILABLE
When you install this Coram Coratech Resin Shower Tray with a Coram Shower Enclosure, a lifetime guarantee is attributed to your purchase.
When used together, their performance is so unbeatable and reliable that your shower tray will be guaranteed against faulty materials or manufacture for a lifetime.
If purchased on it's own, this Coratech shower tray carries a respectable 10 year guarantee.
LESS THAN 25KG WEIGHT
The Health and Safety Executive (HSE) recommends that the maximum safe weight that one person can lift unassisted is 25kg.
Most resin trays on the market today exceed this, and so two people would be required to life.
Coram's entire range of Coratech shower trays are under 25kg, and thus are safe for one person to lift and install.
SUPPLIED WITH CHROME DOMED SHOWER TRAP
This Coram Shower Tray is supplied with a 1.5" (50mm water seal) Top Access Chrome Domed Shower Trap for plumbing installation above the floor to meet UK Building Regulations Part H.
DESIGNED AND BUILT TO BRITISH SITE REQUIREMENTS
The majority of foreign-manufactured products are not designed to be completely watertight due to fully-tiled bathrooms with concrete floors.
In Britain, wooden floors and carpeted bathrooms mean leaks can cause serious damage. This Coram Shower Tray is designed and built in Britain to suit British site requirements.
Coram Shower Tray Installation:
 |
FITTING THE STURDY LEGS AND FEET
Your Coram Shower Tray is supplied to you with factory-fitted legs. Simply screw in the hexagonal feet and the angled screw holes make the feet easy to fix in position. |
 |
THE HEIGHT CAN BE ADJUSTED
The height of the Coram Shower Tray can be reduced from 220mm by up to 30mm by using a trap with a 19mm water seal, fully winding the legs of the shower tray in, and trimming the side panels to the appropriate height. |
 |
EASILY SECURE THE SHOWER TRAY LEGS
The easy-to-adjust threaded feet come with angled screw fixings, meaning that the feet are easily secured into a position of your choosing. |
 |
EASY-TO-TRIM SHOWER TRAY PANELS
Unlike many other shower trays, which include flimsy plastic panels that can be difficult to cut, Coram supply rigid shower tray panels that are simple to cut to the required size. |
 |
THE BEST PANEL FIXING
With specially-designed push-on spring clips, the panels are easy to fit to the legs. These provide the fastest and neatest installation that is far superior to other types of showe tray. This means no unsightly corner joints, and no flimsy panels that require sealant. |
The following link contains further information about this product
