Although the manufactures offer long guarantees on their cylinders, that is little consolation with ruined ceilings and walls, claims to the insurance company and getting a plumber to come out straight away to replace the cylinder.
If only there had been away to catch the water and vent it safely to the outside - like the overflow on the toilet cistern....
The Cylinder Tray provides peace of mind and an early warning against a complete structural failure of the cylinder allowing a home owner to obtain a plumber who can carefully drain and replace the cylinder without doing further damage to the interior decoration of the house.
| Max Height |
130mm |
| Depth to Ridge Top |
80mm |
| Diameter |
590mm |
| Weight |
4.3kgs (with Wood Supports) |
| Max Cylinder Diameter |
585mm |
Construction:
-
Tray is made of MDPE (medium-density polyethylene)
- Joinery grade wood supports (55x55mm square)are bonded into the trays ridges to
- provide extra support for water filled cylinder. (Supplied fitted)
- Note: Drainage pipe to outside is not supplied with the unit.
Features:
-
Gives early warning of leaking cylinders.
- Tray is designed to contain dripping water from the bottom
of corroding cylinders and discharge it to outside via
standard solvent wield overflow pipe.
- Will take 18inch diameter foam lagged cylinder.
- Install on flat level surface only.
- Place cylinder central on tray.
- Keep away from direct sources of heat.
- Run overflow to outside and terminate in highly visible area.
- Periodically check tray inside for damp or wet patches.
Visually check overflow pipe outside building for dripping
and overflowing. This indicates cylinder leakage.
Implement immediate rectifying action.
- Optional Audio Alarm available.
- Flush overflow pipe through periodically check for
unrestricted passage of water.
- We reserve the right to alter tray specification without prior
notice.
Overflow connector and associated pipe work (not supplied) must be capable of withstanding water temperatures of up to 100 Degrees C. We accept no liability for any connection fittings or pipe work that may fail due to excessive high temperatures or faulty installation.
