The Atlas110Twin is a fully automatic floor mounted twin pumping station suitable for pumping both foul and storm water to a higher level when gravity drainage is not possible or economical to install.
The system is suitable for installing either at the initial building stage or retro fitting to existing buildings and can accept waste from a bathroom, changing room, commercial premises or similar.
The system consists of a polyethylene tank, control panel with two built in automatic vortex pumps.
The Atlas110Twin is easy to install, as there are a number of inlets at varying levels/sizes avaliable (inlets to be cut onsite).
Three Phase Specifications
| Motor Rating |
2200w |
| Revolutions Per Min |
1450rpm |
| Max Vertical Output |
9.5m |
| Max Horizontal Output |
90m |
| Max Flow Rate |
900l/m |
| Discharge Size |
80mm |
| Cable Length |
4m |
| Length |
965mm |
| Width |
790mm |
| Height |
561mm |
Single Phase Specifications
| Motor Rating |
1700w |
| Revolutions Per Min |
2800rpm |
| Max Vertical Output |
10m |
| Max Horizontal Output |
90m |
| Max Flow Rate |
660l/m |
| Discharge Size |
80mm |
| Cable Length |
4m |
| Length |
965mm |
| Width |
790mm |
| Height |
561mm |
The following link contains further information about this product
