The
SumpFlush is a fully automatic pumping system specifically designed for pumping storm water when gravity drainage is not possible or economical to install.
The system is suitable for installing either at the initial building stage or retro fitting to existing buildings and can accept waste from car parks, car washes, floor areas, down pipes or similar.
The system consists of a polyethylene tank with a built in automatic waste water submersible pump. It can accept storm water through the grille located on the top of the unit or through two 100mm inlets located to the side (side inlets to be specified at time of order).
The Differences in performance are outlined in the table below
|
|
SumpFlush |
SuperSumpFlush |
| Rated
Current |
1.4A |
3.4A |
| Motor
Rating |
320W |
700W |
| Revolutions
per Minute |
2720rpm |
2600rpm |
| Max.
Vertical Output |
7m |
9m |
| Max.
Horizontal Output |
50m |
75m |
| Max.
Flow Rate |
108
l/m |
270
l/m |
| Discharge
Size |
32mm |
32mm |
| Cable
Length |
3m |
3m |
| Weight |
9kg |
15kg |
The following link contains further information about this product
