The Heatline DIRECT Unvented Stainless Steel Cylinder works just like any ordinary domestic direct hot water cylinder; but they do not require a feed and expansion cistern in the house.
Cold water enters the cylinder through an inlet control group regulating the pressure to 3 bar and so protecting the cylinder from over pressurisation.
A filter is also fitted at the inlet control preventing any unwanted material from entering the water supply. A non-return valve is also fitted preventing back flow from the cylinder - this complies with the water regulations.
Water can be heated either electrically in a direct cylinder or indirectly by means of a boiler. The coils in the Heatline unvented cylinder have been designed to ensure maximum heat transfer providing hot waterin a quick an economical way.
Monitoring of the water temperature can be achieved through thermostats, ensuring you have water at the right temperature whenever you want it.
Fitted with 2 immersions
|
Nom Size
(mm) |
Capacity
(Litres) |
Weight
Full (kg) |
| HL90D |
750 x 520 |
90 |
125kg |
| HL125D |
950 x 520 |
125 |
165kg |
| HL150D |
1075 x 520 |
150 |
195kg |
| HL170D |
1225 x 520 |
170 |
220kg |
| HL200D |
1175 x 570 |
200 |
250kg |
| HL250D |
1375 x 570 |
250 |
310kg |
| HL300D |
1520 x 570 |
300 |
360kg |
|
Heat Up / Reheat Times (65°C) |
| HL90D |
52min / 27min |
| HL125D |
72min / 37min |
| HL150D |
86min / 45min |
| HL170D |
98min / 51min |
| HL200D |
108min / 63min |
| HL250D |
144min / 75min |
| HL300D |
202min / 136min |
Supplied with - Mono Block, Tundish, 2 Port Valve, Aqua Stal, Immersion Heater, Pressure Relief Valve and Expansion Vessel
Delivery is 3 - 5 Working Days
|
