The MX Low Profile Aquastone 1100mm x 800mm Rectangular Shower Tray is an ABS Stone Resin Shower Tray made by the UK’s No:1 Stone Resin Shower Tray Manufacturer.
The patented MX Low Profile shower tray has been specifically designed to complement all of the latest trends in the modern bathroom. At only 45mm high, this stylish and contemporary tray enhances the minimalist look that is so sought after today. It is ideal for use with frameless enclosures and allows a watertight seal by tiling to the outer rim. Maximum showering space
can be achieved because the whole width of the tray can be used.
Versatile Installation features
The MX Low Profile Shower Tray can be converted to an upstand shower tray by the use of the Versatile Seal Strips (available as an optional extra below).
Shower Tray Dimensions (Refer to Diagram Above)
| Waste Position |
Waste Size |
A |
B |
C |
D |
E |
F |
| W1 |
90mm |
1106mm |
806mm |
45mm |
65mm |
190mm |
553mm |
Rigid tray core for extra stability
Traditional Stone Resin infill provides ultimate strength and durability with unbeatable rigidity and the ABS coating provides a warm to touch feeling giving you a shower tray that is strong and useable
Fitting Options
The MX Aquastone Stone Resin Shower Tray Range can be fitted in directly onto the floor.
The Stone Resin Shower Trays are predrilled with a waste hole
(a shower waste is included with this shower tray).
MX Low Profile ABS Stone Resin Shower Trays are designed to fit with the majority of shower enclosures.
The Universal Easy Plumb Kit Principle (add with checkbox under product options tab)
VERSATILE SEAL STRIP
 The Versatile Seal Strip will instantly transform any standard Shower
Tray to an upstand option.
The Versatile Seal Strip is an extruded self-adhesive UPVC upstand that
is fixed by hand to the Shower Tray prior to installation. Available in three lengths, this extruded strip comes complete
with a mould-resistant cushioned seal to ensure a snug fit, which combined
with the unique angled design helps ensure a water tight seal between the
Tray and the wall. The slim profile of the upstand allows easy tile fixing.
To fit the size of Tray simply mitre the lip with two 45º cuts then bend
to form corner. Check the Versatile Seal Strip fits the Tray then mark the
excess length and trim with a sharp knife. A small bead of silicon on the
internal mitred corner before tiling will ensure a waterproof seal. Utilising
the Versatile Seal Strip (see above) great flexibility can be achieved for
tiling and installation. |
