The Marmox Showerstone Wet Room Shower Tray is a self-supporting, barrier-free shower former that is ready to receive tiles, creating a base for a shower or wet-room. It is available in four sizes all being just 22mm thick at the outside edge but still managing an in-built gradient of 2%. This gradient is important to ensure water drains away.
This Wet Room Shower Tray is simple to install on either concrete floors or wooden floors where it can rest on the floor joists and comes supplied with a quality Tile Drain fixed to the base to simplify installation.
The ShowerStone Wet Room Tray is made of a robust polymer concrete using finely graded lightweight aggregate.
The Marmox Showerstone Tray is a solid, preformed shower base that can be tiled directly onto without the need for any surface treatment. It is easy to install and is strong enough to be supported by just wooden floor joists as wide as 400mm apart. Each tray can be neatly cut to size to fit a specific space in your bathroom.
Please Note - This product CANNOT be used in conjunction with vinyl flooring. It only supports tiled floors.
Marmox Showerstone Wet Room Tray Features
- BUILT IN GRADIENT - EASY TO CREATE EFFECTIVE DRAINAGE
- SELF SUPPORTING - CAN SPAN FLOOR JOISTS
- READY TO RECIEVE A SURFACE OF TILES
- ALLOWS FOR THE SMALLEST OF MOSAIC TILES
- EASY TO INSTALL AND CAN BE CUT TO FIT ON SITE
- CAN BE FIXED TO TIMBER OR CONCRETE FLOORS
- SLIMLINE - EASY ACCESS, FLOOR LEVEL
Wet Room Tray Technical Properties
| Composition: |
Polymer (acrylic) Modified concrete & stainless steel drain surround. |
|
Colour: |
Grey |
| Height Clearance required for drain: |
90mm |
| Density: |
0.76 g/cm3 |
| Water Absorption (tested to ASTMC413): |
less than 0.1% |
| Strength (tested to CMB122007): |
In excess of 325k/m2 |
| Fire Rating (DIN 4102): |
Class A1 (highest category) |
Wet Room Tray Specifications
| Tray Size |
Perimeter Height |
Weight |
| 1400x800mm |
22mm |
25kg |
All Marmox Wet Room Shower Trays need to be installed with a Wet Room Waterproofing Kit (choose option above).
Mebrane Tanking Waterproofing Kits
The Showertone Wet Room waterproofing Kits come in 5sqm or 10sqm membrane kits and contain the following items:
Kit contents
- Tanking Membrane 1000mm Wide (Choice of 5sqm or 10sqm)
- 1 Litre of Primer
- 15m Roll of Reinforcing Tape
- 1 x Cartridge of Joint Sealant
- 2 Internal Corners
- Roller
- Full Installation Instructions
|
|
Lastogum Liquid Tanking Waterproofing Kit
Suitable for all flat or vertical surfaces made of any material. Simple to use low-cost product for novices and experts alike.
Compatible with under floor heating and ready for tiling with no further preparation. Covers 5-7sqm.
Kit contents
- 8kg Lastogum
- 1 litre primer for timber/plasterboard
- 10m Flex Tape
- 2 Flex corners
- 2 pipe collars
|
You will also need a Showerstone Tray Trap
Depending on your waste water installation requirements, you will need either a Horizontal or Vertcial Shower Tray Trap. Each Trap comes comeplete with a Chrome Plated Top Grill like the design in the picture above. Choose your option above.
Installation Instructions / Further Reading
