A unique multi functional cleaner, that is designed to digest and remove uncured PU foam from the majority of gun grade and hand held foam applicators.
Uses: The cleaners unique designed plastic moulding is an "all-in-one" component that includes a threaded collar with integral sealing valve and gasket. These features ensure that the PU foam cleaner is compatible with the majority of PU applicators.
Also incorporated into the component is a removable red aerosol actuator button with a clear short plastic tube. This tube dispenses fine accurate jets of cleaner direct to confined areas that require cleaning. This has the added benefit of being able to safely clean all PU foam canister valves, so that they can be safely re-used.
Packaging: 500ml aerosol packed 1, 12 or 24.
Preparation: Always connect/disconnect PU foam cleaner to the applicators with the canister in the upright position and at arms length. This will avoid accidentally activating the pressurised container.
Application: Remove the clear transit cap and red actuator button. Place the applicator gun upside down, screw the upright canister onto the inverted gun. Do not overtighten. This will break the integral sealing valve. Always operate the canister upside down and at arms length with the gun pointing away from the body. Press the trigger to flush the solvent through the gun, flush for at least 5 seconds and ensure the gun outlet tip is thoroughly cleaned. Place the canister upright, unscrew the canister whilst pressing the trigger. This ensures there is no build up of aerosol when disconnecting the gun applicator from the canister.
Finishing: Collect all waste material into a suitable container and dispose in a safe manner. DO NOT ATTEMPT TO CLEAN OUT APPLICATORS IF THEY ARE BLOCKED WITH CURED PU FOAM. It is the user's responsibility to dispose of all packaging correctly.
|
