Heating technology has advanced considerably, and floor heating is now much more affordable and an efficient way of heating homes. Installing floor heating opens up a whole range of possibilities for homeowners, revolutionising interior design and creating a comfortable, gentle and even heat.
The Polyplumb Underfloor Heating System is suitable for use in hot and cold water supply, and both radiator and floor central heating systems. The polybutelene pipe provides flexibility and freedom when designing pipe layouts.
Overlay floor system information
Overlay can be installed in most buildings and linked into the existing heating system via a zonal regulation unit (ZRU).
The system uses a low profile panel that is laid over existing solid or timber floors. The 18mm thick panels are laid on the existing load bearing floor and glued together.
The pre-formed plastic return bends are placed at opposite ends of the room. The 12mm barrier pipe is laid in the grooves, and the system can either be directly covered by tile or laminate flooring or a 4mm plywood capping layer used for vinyl.
|
Key Design and Installation Information
|
|
Maximum heat output
|
Approx. 100w/m2
|
|
Recommended design flow temperatures
|
45° to 50°
|
|
Maximum circuit length
|
75m
|
|
Maximum coverage per circuit
|
12m2
|
|
|
Solid floor room pack contents
|
|
Temperature Limiting Valve
|
1
|
|
Overlay Panel (10pk)
|
1
|
|
Overlay Glue
|
1
|
|
Overlay Pipe (12mm x 80m)
|
1
|
|
Overlay End Returns (10pk)
|
1
|
|
12 x 15mm Adaptors (2pk)
|
1
|
|
|
|
Material Requirements (approx)
|
|
Overlay floor panels
|
Coverage 0-48m2
|
|
Pipe
|
7m/m2
|
|
End returns
|
1 return bend per floor panel
|
|
12mm x 80m coil of pipe
|
1 coil per circuit
|
|
14mm x 12mm adaptors and sriffeners
|
1 pack per circuit
|
|
|
Delivery on this product will be 7 to 8 working days
|
