Qss Oil Tanks are bottom outlet oil tanks. Top outlet models can be made to order, but delivery times will increase. Call for more information
About QSS Tanks
This QSS Horizontal Oil Tank, capacity 2000 Litres (440 Gallons), is a single skin tank that is superbly manufactured to the highest standards. The design of every QSS oil tank is as a result of QSS talking to their customers and listening to their needs to bring great looking tanks with superb features on the market at a low competitive price.
This Oil Tank has the Oftec OFCERT Licence Number: 0680050804. Click here to find out more
This option is for the tank only.
QSS Oil Tanks are a british made product (in Worcestershire) and have been established since 2002 and pride themselves on their very best customer service
|
 |
QSS Oil Tank Features
- Every QSS oil tank undergoes a thorough inspection prior to despatch.
- All QSS Oil Tanks should be installed on a firm flat surface supporting the entire base area of the tank, this base should extend 300mm on all sides. Refer to OFTEC booklet TI/131 for advise on siting of tanks.
- All tanks are manufactured from UV stabilised medium grade polyethylene and are supplied with 1" BSP outlets.
- QSS tanks are compatible with the latest electronic low level and overfill alarms
Further Information about QSS Oil Tanks
QSS tanks are members of OFTEC and all their products are manufactured in accordance to current OFTEC guidelines. All QSS Oil tanks come complete with a ten year warranty and an OFTEC CD10T which should be completed at time of installation, risk assessment reports TI/133 should also be completed before installation, T19 will give advice on construction of tank base required. Contact OFTEC at
www.oftec.co.uk for further information.
THE LAW ON SINGLE SKIN OIL TANK INSTALLATION
QSS single skin tanks are designed for the storage of heating fuels in domestic installations. However, if the tank is to be sited within the following situations - a bunded oil tank must be used;
- - 50 metres of a well, borehole or spring
- - 10 metres of controlled water e.g. open drain, manhole cover, river, stream or lake
- - where the tanks vent is not visible from its fill point
- - where the capacity exceeds 2500 litres or when any potential spillage could run over ground into controlled waters
Please note that Single Skin
Oil Tanks are not suitable for installation at commercial, industrial or institutional installations. Installation of Single Skin
Oil Tanks at domestic premises is only permitted following a Risk Assessment undertaken by a suitably competent person.
This is a kerb side delivery service. Please ensure help onhand to help unload the delivery lorry.
