Code

Description

Inc. VAT

Excl. VAT

	P10076337 - Range Tribune TI180P Pre-Plumbed Indirect Cylinder		£992.86		£827.38
HEATRAE SADIA MAXISTORE IMMERSION HEATERS For Economy 7 Hot Water Cylinders
Heatrae Sadia Maxistore Economy 7 Immersion Heater 14 Inch 3kW £34.26 (£28.55 exc. VAT)
HEATRAE SADIA TITANIUM IMMERSION HEATERS Suited to hard and very aggressive water conditions
Heatrae Sadia Titanium Immersion Heater 11 Inch 3kW with Thermostat £66.72 (£55.60 exc. VAT)
Heatrae Sadia Titanium Immersion Heater 14 Inch 3kW with Thermostat £70.93 (£59.11 exc. VAT)
Heatrae Sadia Titanium Immersion Heater 27 Inch 3kW with Thermostat £73.73 (£61.44 exc. VAT)
HEATRAE SADIA SUPERLOY IMMERSION HEATERS Nickel alloy - best suited to aggressive water conditions
Heatrae Sadia Superloy Immersion Heater 11 Inch 3kW with Thermostat £26.70 (£22.25 exc. VAT)
Heatrae Sadia Superloy Immersion Heater 27 Inch 3kW with Thermostat £28.97 (£24.14 exc. VAT)
Heatrae Sadia Superloy Immersion Heater 36 Inch 3kW with Thermostat £31.92 (£26.60 exc. VAT)
HEATRAE SADIA GOLD DOT IMMERSION HEATERS Suitable for normal water conditions
Heatrae Sadia Gold Dot Immersion Heater 11 Inch 3kW with Thermostat £24.31 (£20.26 exc. VAT)
Heatrae Sadia Gold Dot Immersion Heater 14 Inch 3kW with Thermostat £25.30 (£21.08 exc. VAT)
Heatrae Sadia Gold Dot Immersion Heater 27 Inch 3kW with Thermostat £25.30 (£21.08 exc. VAT)
Heatrae Sadia Gold Dot Immersion Heater 30 Inch 3kW with Thermostat £26.29 (£21.91 exc. VAT)
Heatrae Sadia Gold Dot Immersion Heater 36 Inch 3kW with Thermostat £27.53 (£22.94 exc. VAT)
HEATRAE SADIA RDT RESETTABLE IMMERSION HEATERS Suitable for upgrading without the need for draining down the hot water cylinder
Heatrae Sadia RDT Resettable Immersion Heater 7 Inch Horizontal £17.69 (£14.74 exc. VAT)
Heatrae Sadia RDT Resettable Immersion Heater 11 Inch Horizontal £17.83 (£14.86 exc. VAT)
Heatrae Sadia RDT Resettable Immersion Heater 11 Inch Vertical £17.83 (£14.86 exc. VAT)
Heatrae Sadia RDT Resettable Immersion Heater 18 Inch Vertical £18.01 (£15.01 exc. VAT)

---

Range Tribune Stainless Steel Pre-Plumbed Indirect Cylinders

---

The Range Tribune Stainless Steel Pre-Plumbed Indirect Cylinder is available in a highly popular pre-plumbed format - one that dramatically reduces the installation time. The units are factory assembled and are both pre-plumbed and pre-wired with 230V central heating controls, a pump, two 2-port motorised valves, automatic bypass and a balancing valve.

All Range Tribune Stainless Steel Pre-Plumbed Indirect Cylinders are also supplied with programmer, room stat, as well as both a central heating and hot water expansion vessel pack.

This pre-plumbed system will not only speed up the installation process, but will also increase the integrity of the central heating system. This makes costly call-backs a thing of the past!

1. 22mm hot water draw 2. Cold Water Inlet 3. Temperature Relief Valve 4. Cold Feed Drain Elbow 5. Immersion Heater 3kW 6. Twin Thermostat 7. Flow from Boiler 8. Circulating pump 9. 22mm Central Heating 2 port valve 10. Filling Loop Flexible Hose

11. Bottle Air Eliminator 12. 22mm DHW 2 Port valve/safety valve 13. Heating circuit drain elbow 14. 22mm Balancing valve (Lockshield) 15. 22mm Return from radiator circuit 16. 22mm Return to boiler 17. 22mm Automatic by-pass valve 18. Wiring Centre 19. Tundish

---

Range Tribune Stainless Steel Pre-Plumbed Indirect Cylinders Specification

---

	TIS120P Model	TIS150P Model	TIS180P Model	TIS210P Model	TIS250P Model	TIS300P Model
Capacity (Litres)	120	150	180	210	250	300
Height (mm)	906	1093	1281	1496	1792	2032
Diameter (mm)	550	550	550	550	550	550
Empty Weight (kg)	45	50	55	60	65	70
Full Weight (kg)	165	200	235	270	315	370

---

The following link contains further information about this product

Further Information