The Smiths Eco-Powerad 1500 Low Level Wall Mounted Hydronic Fan Convector is smaller than a radiator, yet has a bigger output. Combining elegant good looks with high efficiency, the simplistic appeal of the Smiths Eco-Powerad 1500 Low Level Wall Mounted Hydronic Fan Convector is perfect for home or workspace. Independent tests show that the Eco-Powerad can be over 30% more efficient than the equivalent output radiator.
Product Features
- Supplied with mounting brackets
- Unit must be earthed
- Suitable for two-pipe central heating systems
- Unit needs to be between 150mm and 500mm above floor level
- Check water is hot enough to activate the low temperature cut-out thermostat
- Ensure system is balanced for even heat distribution
- Low temperature cut-out thermostat, set to energise fan at approximately 35 degree C
- Rocker switch - normal/low
- Supplied as standard in white but casing can be supplied in any colour
- Compatible with most types of wet central heating systems
- Functioning equally efficiently with conventional boilers, biomass technology or ground or air source heat pumps
- Compatible with thermostatic radiator valves (sold separately)
- Supplied with a 5 year guarantee from the manufacturer
HOW DOES HYDRONIC FAN CONVECTION WORK?
Fan convectors require connection to a wet central heating system and an electrical connection to run the fan. Hot water passes through the heat exchanger and heat is transfered to the aluminium fins. Cooler air is drawn in and heated before being expelled back into the room. This technology uses, on average, less than 2p of electricity per day. It means that a more even temperature gets distributed and the room will be heated much faster than a traditional panel radiator.