Supplying all types of Hot Water Cylinders - Unvented Cylinders, Open Vented Cylinders, Twin Coil Cylinders, Immersions & more...

< < < Worcester Greenskies Twin Coil Solar Cylinder

Worcester Greenskies Twin Coil Solar Cylinders

- Ref: 117575

Worcester Greenskies Cylinders

The Worcester Greenskies cylinder is a stainless steel unvented twin coil storage cylinder specifically designed to be installed in conjunction with Worcester Greenskies solar system. Should installation with an alternative solar system be considered please seek guidance to ensure compatibility prior to commencing installation.

The Greenskies cylinder is not compatible in an installation utilising two individual boilers.

The Greenskies solar cylinder is made from Duplex stainless steel for excellent corrosion resistance. Greenskies cylinders have a strong rust-proofed steel case and are well insulated with environmentally friendly foam. It is available in a range of 4 sizes from 180 - 300 litres.

The Greenskies cylinder is supplied complete with all the necessary safety and control devices needed to connect to the cold water mains. All are pre-adjusted. High quality controls have been selected to combine high flow rate performance with minimum pressure drop to make Greenskies cylinders perform well in most areas. Greenskies cylinders are WRAS approved to show compliance with Building Regulations G3 and Part L. Storage prior to installation

The Greenskies cylinder should be stored in its original packaging in an upright position in an area free from excessive damp.

Dimensions (See Diagram Above)

Model	180	210	250	300
A	365	365	365	365
B	420	420	420	420
C	465	465	465	465
D	Not Fitted	1000	1105	1255
E	825	925	1050	1200
F	880	980	1050	1200

Features

Inlet control set (pressure reducing valve, strainer, non-return valve and expansion relief valve).
Temperature & pressure relief valve.
15mm/22mm Tundish.
Expansion vessel 18 litre or expansion vessel 24 litre.
Wall mounting bracket (for the expansion vessel).
22mm DZR compression connections.
1 x 15mm end feed tee.

2 x two port valves.
Wiring centre.
Pockets for thermostat points.
1 x dual thermostat and 1 x high limit thermostat.
Greenskies cylinders are WRAS and BBA approved products to meet G3 Building Regulations.
Expansion valve (to discharge).
Expansion vessel hose.
Immersion heater with thermostat and thermal cut out.