The Danfoss 102 Electro-Mechanical 24 Hour Programmer is a general purpose mini-programmer which provides linked outputs for water and heating.
It features a thumbwheel, which allows early selection of future switching operations.
It is an easy to use 24 hour model, which fits the GP wallplate and has an identical wiring configuration. This allows systems to be upgraded without the need for rewiring.
The current state of output is clearly visible on this model.
The 102 is used with control systems where heating and domestic hot water are required at the same times. The heating can be switched off during the summer.
- Proven reliability
- Easy to use
- All units interchangeable on the same wallplate
- Available in 24 hour, 5/2 day and 7 day versions
- Clearly shows state of output
Danfoss 102 Electro-Mechanical 24 Hour Programmer Specs:
| CodeNumber | 087N652100 |
| Type | 102 |
| Description | Electro-mechanical, 24 hour mini-programmer |
| Programmes Selectable | Water only / Off / Water & Heating |
| On/Offs per Day | 2 |
| Advance override | Yes |
| +1 Hour Override | No |
| Voltage Rating | 230 Vac plus/minus 10%, 50/60 Hz |
| Contact Rating | 6 (2.5) A |
| Switching Action | SPST |
| Maximum Ambient Temperature | 55°C |
| Memory Back-up | N/A |
| Dimensions | 106 wide x 135 high x 63 deep mm |
