Condensing Systems Gas Boilers | Systems Boilers | Gas Systems Boiler |
Gas Systems Boilers, Gas Condensing Systems BoilersWhy Choose a Gas Systems BoilerA gas systems boiler is for use within a large property with multiple bathrooms, due to the need for greater Water demand. The gas systems boiler comes with everything already built into the boiler to create a Sealed System. This includes a Pump, Expansion Valve, Pressure Relief Valve and Pressure Gauge. with the systems boiler already having these components inside the boiler this saves time and space for the plumber and Householder respectively. A gas systems boiler would normally be fitted for use with a Stainless Steel Unvented Cylinder which negates the need for a Cold Water storage tank in the loft due to the cylinder being fed by the Cold Mains water Pipe.An Indirect Cylinder (Stainless Steel) used in line with a gas systems boiler can produce recovery times of only 15 minutes with a 70L cylinder and only 27 minutes on a 300L cylinder after a 70% draw off which is considerably less than a normal Open Vented Copper Cylinder. The Benefits of a Gas Systems BoilerThe other benefits of a gas systems boiler installation is that you can achieve a higher Water Pressure to be able to cope with the multiple Draw offs, which allows the water to be pumped around the Primary Hot Water circuit and the Central Heating circuit at higher Flow Rates which is more economical than the traditional Open Vented system.Are Gas System Boilers classed a High Efficiency Boilers?Yes. All the systems Boilers that heatandplumb.com have available for sale are condensing systems boilers. The high efficiency of these boilers is achieved by recycling and abstracting the heat from the exhaust gases where, in non-condensing boilers, the heat present in the exhaust gases is wasted to the atmosphere.The Different makes of Gas Systems BoilersMost boiler manufacturers produce system boilers, and heatandplumb.com can supply the following gas systems boilers:
|
