Delphi Edge Matt Black Mono Basin Mixer Tap (inc Press Top Waste)

Delphi Edge Matt Black Mono Basin Mixer Tap (inc Press Top Waste)

Matt black gives this mono mixer a quiet, graphic presence: a square block body with softly eased corners, a flat blade spout reaching 110mm across the bowl, and a single wide lever resting on top. Against white ceramic it reads almost as a silhouette, which is why matt black brassware works so well with plain tiles and pale timber vanity units. It stands 160mm tall and needs one tap hole.

A matching press-top waste in the same matt black is supplied with it.

Product Features

• Mono basin mixer for a single tap hole, supplied with a matching press-top waste
• Square block body 160mm tall with a flat blade spout reaching 110mm over the bowl
• Single wide blade lever on top, lifted to start and swung to set temperature
• Soft matt black finish that reads as a silhouette against white ceramic and pale tiles
• Suits a pedestal, semi-pedestal, wall-hung or inset vanity basin
• Single lever ceramic cartridge blends hot and cold without washers to wear out
• Brass body weighing 2.08kg, built to survive years of daily handling
• Works from 0.2 bar, so gravity-fed tanks are as workable as a combi
• WRAS approved, so it meets the UK water supply regulations
• Gives 7.9 litres per minute at 0.5 bar, rising to 20.1 at 3 bar
• Guarantee: 3 years, with 12 months on serviceable moving parts

Important Information

• A matching press-top waste is included, so no separate waste is needed.