Verona Velora Gunmetal Tall High Rise Basin Mixer Tap

Verona Velora Gunmetal Tall Basin Mixer Tap

A countertop basin sits proud of the worktop, which leaves an ordinary mixer below the rim - the Velora tall basin mixer is built for exactly that job. Its slender round column rises 230mm before the spout leaves the body, then reaches 155mm forward to land the water over the centre of a vessel bowl. The diamond-knurled knob operates through a precise quarter turn on ceramic discs, and the gunmetal finish makes the tall column a moody, contemporary accent above the basin.

Product Features

• Tall, high-rise mono basin mixer designed for countertop and vessel basins
• 291mm overall height with 230mm from base to spout and a long 155mm reach - clears the rim of a raised bowl
• Slender round column with diamond-knurled control knob and squared blade-style spout
• Moody, contemporary gunmetal finish over a solid brass body
• Quarter-turn ceramic disc valve gives precise, drip-free control with no rubber washers to wear out
• Measured flow of 5.7 litres per minute at 1 bar, rising to 9.9 at 3 bar - a controlled stream that helps limit splashing over the longer fall into the bowl
• Requires a minimum of 1.0 bar water pressure - well suited to combi boiler and pressurised (unvented) systems; older gravity-fed systems may need a pump
• Fits a standard single tap hole with 1/2 inch BSP connections
• For conventional basins, the standard Velora basin mixer suits better - with matching bath taps across the collection

Important Information

• A basin waste is not included - unlike the standard Velora basin mixer, this model is supplied as the tap only, so order a waste to suit your basin separately