Call us today until 10:00pm on 0203 113 2122We are open tomorrow at 8:00am

0
£0.00 Inc VAT
  • Big Brands at Trade Prices

  • Choose from over 50,000 product lines

  • FREE Delivery on All Products *

    FREE Delivery

    Free delivery to UK except Scotland, Highlands, Ireland, Northern Ireland and Outlying Islands.

  • TrustPilot
Click here to Zoom
  • Danfoss Randall AVDO22 22mm Straight Automatic By-Pass Valve
  • Danfoss Randall AVDO22 22mm Straight Automatic By-Pass Valve
  • Danfoss Randall AVDO22 22mm Straight Automatic By-Pass Valve
  • Danfoss Randall AVDO22 22mm Straight Automatic By-Pass Valve

Danfoss Randall AVDO22 22mm Straight Automatic By-Pass Valve

Reference: PAVDO22
  • Free Delivery*Approx 5 Working Days

  • Product Guarantee 1 Years GuaranteeOn this product

  • Write Review

    Write a Review

The AVDO range of automatic bypass valves can be used as either differential pressure controls or to provide a minimum flow through a system. Many boiler manufacturers are now insisting that a bypass be fitted in all installations to ensure that the volume of water circulating through the boiler does not fall to below a predefined minimum, regardless of the load on the system. Recognising the energy efficiency advantage of such controls the Building Regulations now require in both new-build and boiler replacement contexts, where a bypass is specified by the boiler manufacturer, that an automatic bypass is fitted. Automatic bypass valves improve system efficiency by opening only when there is a need to bypass water, this usually occurs at times of part load when radiator thermostats in the system are partly closed and water flow around the boiler is restricted. In addition to ensuring adequate flow around the boiler, automatic bypass valves also prevent pump pressure from climbing significantly above design levels, thus reducing the risk of noise in the system. Available in a variety of sizes, the capacity of this range of valves is very high with large but linear changes in water throughput for relatively small increases in differential pressure. This allows a 15mm valve to be used in situations where 22mm valves are normally required.
  • Easy to set, self acting flow controller
  • Opens on rising differential pressure
  • DN15, DN20, DN25
  • Setting range of 0.05 to 0.5 bar
  • Internal/External thread variants
  • Improves system efficiency
  • Maintains minimum flow rates through boiler and pump
  • Essential in low water content boiler systems
CodeNumber003L612200
TypeAVDO
Setting Range0.05 - 0.5 bar
Connection Inlet22 mm
Connection Outlet22 mm
Max. Differential Pressure0.5 bar
Max. Flow Temperature100 ° C
Max. Working Pressure10 bar
DesignStraight

Email


wish-list-heat&plumb

Make a Wish list

Enter your email address to save your Wish list.

Once you have created your wish list you can return to it anytime via the link at the top of the page, and you can share your list to friend.

Verify Email

Please Enter One Time Password sent to your Email address and Verify your account.