Delphi Belgravia Brushed Brass Basin Taps Pair
A pair of separate hot and cold pillar taps is the most period-correct way to dress a two tap hole basin, and this is the plainest, most traditional shape in the Belgravia range. Each tap is an individual unit with its own crosshead handle above a turned column and a short cast spout, so the hot and cold sit symmetrically at either side of the bowl. The brushed brass finish keeps the columns warm and understated, which suits the simplicity of the shape. Be clear on the trade-off: separate taps do not blend the water, so you get hot from one and cold from the other rather than a mixed temperature - if you want blending from two tap holes, the Belgravia bridge mixer is the alternative. Each tap stands 115mm tall with an 85mm reach and 25mm from the deck to the spout outlet, on full-turn screw-down valves with replaceable washers.
Product Features
- Pair of traditional pillar taps - one hot and one cold - for two tap hole basins
- Turned solid brass column bodies with crosshead handles and white ceramic hot and cold indices
- Brushed brass finish on both taps for a matched pair straight out of the box
- Screw-down compression valves with full-turn operation and replaceable washers
- 115mm high with an 85mm spout reach and 25mm from the deck to the spout outlet
- Separate hot and cold delivery - water is not blended, in keeping with authentic period brassware
- Operates from 0.1 Bar, so it suits gravity-fed tanks as well as combi and pressurised systems
- 1/2 inch BSP inlet connections to standard UK tap tails
- Also available in chrome, and matched by the Belgravia bridge mixer if you would prefer blended water
- Backed by a 5-year manufacturer guarantee (subject to terms)
Important Information
- Basin waste is not supplied with these taps - several options are available separately
