Delphi Belgravia Brushed Brass Luxury Bridge 2-Hole Basin Mixer Tap
A bridge tap joins the two separate pillars of an older basin across the top, and the Belgravia version turns that piece of plumbing logic into the most decorative tap in the range. Turned collars, a swelling body on each leg and a horizontal bridge carrying the spout give it a profile that stands 140mm above the basin, noticeably taller than the mono mixer and clearly meant to be looked at. The brushed brass finish shades the turned rings and shoulders instead of flaring them, so the shape reads as sculpture rather than sparkle. Because the water is blended inside the bridge, you get genuine mixed-temperature flow from a two tap hole basin, which a pair of separate pillar taps simply cannot offer. Note the low 32mm from deck to spout outlet with a 92mm reach - this one is designed to sit close over the bowl rather than arch above it.
Product Features
- Traditional bridge basin mixer for two tap hole basins, blending hot and cold through a single spout
- Decorative turned bridge and pillar design standing 140mm above the basin
- Solid brass body and spout with crosshead handles and white ceramic hot and cold indices
- Brushed brass finish carried across every turned collar and shoulder in the casting
- Screw-down compression valves with full-turn operation and replaceable washers
- 92mm spout reach with 32mm from the deck to the spout outlet
- Operates from 0.1 Bar - suitable for gravity-fed tanks as well as combi and pressurised systems - and strong for a basin tap at 12.00 litres per minute even at 0.1 Bar
- 1/2 inch BSP inlet connections to standard UK tap tails
- Also available in chrome, with matching bath, bidet and shower brassware across the Belgravia range
- Backed by a 5-year manufacturer guarantee (subject to terms)
Important Information
- Basin waste is not supplied with this tap - several options are available separately
