Delphi Corinthian Matt Black High Rise Tall Mono Basin Mixer Tap
A standard basin mixer sits too low to be much use over a countertop bowl, and that is the gap the Delphi Corinthian High Rise Tall Mono Basin Mixer Tap is built to fill. The slim brass column stands 298mm tall with the spout breaking out 200mm above the deck and reaching 151mm forward, so the water lands inside a vessel basin rather than on its rim. Above that sits the same side-mounted stick lever as the standard height Corinthian basin mixer, handling flow and temperature in one movement. The matt black version turns that column into a deliberate dark line above the basin. A 0.2 bar minimum keeps it usable on gravity fed plumbing as well as mains pressure.
Product Features
- Tall high rise mono basin mixer, deck mounted through a single tap hole
- 298mm overall height with the spout outlet 200mm above the deck and a 151mm reach - enough to clear the rim of a typical countertop or vessel basin
- Single lever operation: lift for flow, move left or right for temperature
- Matt black finish - flat and non-reflective, which suits the tap's tall, upright profile
- Ceramic disc cartridge rather than rubber washers - smoother in use and much less prone to dripping over time
- Solid brass body, weighing 1.1kg, with 1/2 inch BSP inlet connections
- Minimum 0.2 bar working pressure, so gravity fed systems are fine alongside combi boilers and unvented cylinders
- Delivers 5 litres per minute at 0.1 bar and 9.9 litres per minute at 1.0 bar
- Standard height basin mixer, bath filler and bath shower mixer available in the same Corinthian range and the same three finishes
- 5 year manufacturer guarantee against faulty workmanship and materials (subject to terms)
Important Information
- Basin waste not supplied - the tap comes on its own, so order a waste to suit your basin (slotted where the basin has an overflow, unslotted where it does not)
