Delphi Edge Chrome Basin Mixer and Bath Shower Mixer Tap Set (inc Shower Kit and Press Top Waste)

Delphi Edge Basin Mixer and Bath Shower Mixer Tap Set - Chrome

Edge's square column, flat blade spout and wide lever run from the basin to a bath shower mixer in this set, and even the handset is a square stick that keeps to the same straight lines. One fitting fills the bath and rinses it down afterwards, which makes the set a good answer for a bathroom with no separate shower. Supplied in chrome.

Bundle Contents

• 1 x Mono Basin Mixer Tap with Press Top Waste - Chrome (EDG-BAS-CP)
• 1 x Bath Shower Mixer Tap with Handset and Hose - Chrome (EDG-BSM-CP)

Basin Mixer Features

• Mono basin mixer for a single tap hole, supplied with a matching press-top waste
• Rectangular column 160mm tall with a flat blade spout reaching 110mm
• Wide rectangular lever across the top for one-handed flow and temperature
• Single lever ceramic disc cartridge, with hard discs in place of perishable washers
• Works from 0.2 bar, suiting gravity-fed tanks as well as combi systems
• Chrome finish on both taps, so basin and bath match

Bath Shower Mixer Features

• Pillar mounted bath shower mixer for two tap holes at 180mm centres
• Square stick handset and hose supplied, following the Edge lines
• Diverter switches the flow between the bath spout and the handset
• Square pillars with blade levers, a quarter turn from off to full flow
• Needs 2 bar, so a combi or unvented cylinder rather than a gravity tank
• Guarantee: 5 years on both taps, with 12 months on serviceable moving parts

Important Information

• A matching press-top waste is supplied for the basin; a bath waste is not included.