Delphi Edge Chrome Tall Mono Basin Mixer Tap

Delphi Edge Chrome Tall Mono Basin Mixer Tap

Chrome exaggerates height, and on a 290mm column that is exactly the point. The post is slim and square, the spout a flat blade running 150mm out, and the reflections along the vertical edges make the tap look taller still. It is built for a countertop or vessel basin, where a standard 160mm mixer would sit too low to be useful, and it needs just one hole in the worktop.

A wide rectangular lever on top handles temperature and flow in one movement.

Product Features

• Tall mono basin mixer for a single tap hole, sized for countertop and vessel basins
• Slim square post 290mm tall with a flat blade spout reaching 150mm
• Bright chrome reflections along the vertical edges make the column look taller still
• Wide rectangular lever on top for one-handed temperature and flow control
• Solves the problem of a standard height mixer sitting too low behind a raised bowl
• Single lever ceramic cartridge, with hard discs in place of perishable washers
• Brass body weighing 2.38kg, keeping a tall tap stable on the worktop
• Works from 0.2 bar, so gravity-fed tanks and combis are both fine
• WRAS approved, so it meets the UK water supply regulations
• Gives 7.5 litres per minute at 0.5 bar, rising to 20.2 at 3 bar
• Guarantee: 5 years, with 12 months on serviceable moving parts

Important Information

• A waste is not included with this tap and must be ordered separately.