Delphi Edge Chrome 3-Hole Wall Mounted Basin Mixer Tap (inc Backplate)

Delphi Edge Chrome 3-Hole Wall Mounted Basin Mixer Tap (inc Backplate)

Taking the tap off the basin entirely leaves the ceramic clean and makes wiping around it far easier. This three-hole wall set puts a long flat blade spout in the middle, projecting 181mm from the wall, with a lever valve either side. A backplate is included, which covers the pipework openings and gives you a tolerance to work with when the holes are not perfectly aligned. It projects only 70mm from the face of the wall.

Solid brass throughout, in bright chrome, weighing 2.47kg.

Product Features

• Three-hole wall mounted basin mixer, supplied with a backplate to cover the wall openings
• Long flat blade spout projecting 181mm from the wall over the basin
• Lever valve either side of the spout, both flush against the backplate
• Backplate hides the pipe openings and allows for slight misalignment during fitting
• Bright chrome finish that leaves the basin ceramic clear and easy to wipe around
• Quarter turn ceramic disc valves that move off to full in a short sweep
• Solid brass construction weighing 2.47kg, giving a hard-wearing and durable core
• Works from 0.2 bar, so gravity-fed tanks suit it as well as combis
• Strong 11.9 litres per minute at 0.5 bar, rising to 29.3 at 3 bar
• Guarantee: 5 years, with 12 months on serviceable moving parts

Important Information

• A waste is not included with this tap and must be ordered separately.