Delphi Edge Chrome 3-Hole Wall Mounted Basin Mixer Tap

Delphi Edge Chrome 3-Hole Wall Mounted Basin Mixer Tap

Where the pipework has been set out precisely, there is no need for a plate to hide it, and this version of the three-hole wall mixer goes without one. Each piece mounts on its own small round flange: a flat blade spout projecting 183mm from the wall, and a lever valve on either side. The result is a very spare arrangement of three chrome elements against the tiling, standing just 75mm proud of it.

It suits a wall-hung or countertop basin where the tap is not fitted to the ceramic at all.

Product Features

• Three-hole wall mounted basin mixer, with each piece on its own individual flange
• Flat blade spout projecting 183mm from the wall, standing 75mm proud of the tiling
• Separate lever valve either side of the spout for hot and cold
• No backplate, so the wall pipework must be set out accurately before tiling
• Bright chrome that reads as three spare elements against the tiled wall
• Quarter turn ceramic disc valves, precise to set and slow to develop a drip
• Solid brass construction weighing 2.24kg, giving a hard-wearing and durable core
• Works from 0.2 bar, which brings gravity-fed tank systems into range
• Delivers 11.9 litres per minute at 0.5 bar and 29.3 at 3 bar
• Guarantee: 5 years, with 12 months on serviceable moving parts

Important Information

• A waste is not included with this tap and must be ordered separately.