Delphi Edge Matt Black 2-Hole Wall Mounted Basin Mixer Tap (inc Backplate)

Delphi Edge Matt Black 2-Hole Wall Mounted Basin Mixer Tap (inc Backplate)

One lever, one spout, one plate. This wall mixer reduces the tap to a long flat blade projecting 181mm out over the basin and a single upright lever beside it, both mounted on a rounded-corner rectangular backplate. In matt black against white tiling the plate becomes part of the design rather than something to hide, and the whole assembly stands only 70mm from the wall.

The backplate covers the pipe openings and gives a little tolerance during fitting.

Product Features

• Two-hole wall mounted basin mixer, supplied with a backplate covering the wall openings
• Long flat blade spout projecting 181mm from the wall over the basin
• Single upright lever beside the spout, sitting flush on the same backplate
• Soft matt black turns the rounded-corner plate into part of the design
• Projects just 70mm from the wall face, leaving the basin ceramic completely clear
• Single lever ceramic cartridge that repeats its temperature setting accurately
• Brass body weighing 2.04kg, built for years of daily use
• Works from 0.2 bar, so gravity-fed tanks suit it as well as combis
• WRAS approved, so it meets the UK water supply regulations
• Gives 7.1 litres per minute at 0.5 bar and 18.5 at 3 bar
• Guarantee: 3 years, with 12 months on serviceable moving parts

Important Information

• A waste is not included with this tap and must be ordered separately.