Delphi Edge Brushed Bronze 2-Hole Wall Mounted Basin Mixer Tap (inc Backplate)

Delphi Edge Brushed Bronze 2-Hole Wall Mounted Basin Mixer Tap (inc Backplate)

Bronze on a wall mixer picks up whatever warm light is in the room and holds it along the length of the spout blade, which here projects 181mm out over the basin. A single upright lever sits beside it on a rounded-corner backplate, and solid brass underneath gives the assembly a reassuring 2.04kg. The deep coppery brown suits terracotta, clay and warm plaster finishes.

The tap projects only 70mm from the wall face.

Product Features

• Two-hole wall mounted basin mixer, supplied with a backplate covering the wall openings
• Flat blade spout projecting 181mm from the wall, standing 70mm proud of it
• Single upright lever on the same rounded-corner backplate as the spout
• Deep brushed bronze that suits terracotta, clay and warm plaster wall finishes
• PVD coated for a durable brushed bronze appearance that resists tarnishing and scratching
• Solid brass construction weighing 2.04kg, giving a hard-wearing and durable core
• Single lever ceramic cartridge, with hard discs rather than washers that perish
• Works from 0.2 bar, so gravity-fed tanks suit it as well as combis
• Gives 7.1 litres per minute at 0.5 bar, rising to 18.5 at 3 bar
• Guarantee: 3 years, with 12 months on serviceable moving parts

Important Information

• A waste is not included with this tap and must be ordered separately.