Delphi Loop Chrome 3-Hole Wall Mounted Basin Mixer Tap

Delphi Loop Chrome 3-Hole Wall Mounted Basin Mixer Tap

Three separate wall mounted pieces make up this chrome basin mixer: a flat blade spout in the centre projecting 177mm from the wall, with a hot and a cold control set either side of it. Each control is a low round body with a curved paddle lever and a quarter turn action. There are no backplates in the box, so the wall face needs to be finished tidily around each opening.

The result is a basin with nothing on its surface at all, which is why wall mounted taps suit countertop bowls so well.

Product Features

• Three hole wall mounted basin mixer for a wall with concealed pipework
• Flat blade spout projecting 177mm from the wall over the basin
• Hot and cold controls with curved paddle levers, one on each side
• Bright polished chrome on all three wall mounted pieces
• Ceramic disc valves seal disc against disc, so no washers wear out
• Solid brass body weighing 1.88kg, built to last through years of use
• Opens from 0.2 bar, which suits gravity-fed tanks and combi boilers alike
• Delivers 16.3 litres per minute at 1 bar and 28.2 at 3 bar
• Backplates are not supplied, so the wall face is left visible around each opening
• Guarantee: 5 years, with 12 months on serviceable moving parts

Important Information

• A waste is not included with this tap and must be ordered separately.