Delphi Nectar Chrome Dual Concealed Shower Set with Fixed Head and Slide Rail Kit

Delphi Nectar Chrome Dual Concealed Shower Set with Fixed Head and Handset

Two sprays from one squared off wall is the point of this Nectar set: a 200mm rainfall head overhead and a slim rectangular rail alongside it. The valve plate is rectangular with square handle bodies and pin levers, and the head, arm and rail all keep to the same right angled geometry.

The concealed thermostatic valve feeds both accessories from two controls, one setting the temperature and one turning the shower on and diverting between the overhead and the handset. Valve, 200mm head, 321mm arm, slim rail kit and wall outlet elbow are supplied together for one price.

Bundle Contents

• 1 x Delphi Nectar Chrome 2-Outlet Dual Concealed Shower Valve
• 1 x Delphi Square Chrome Fixed Shower Head 200mm x 200mm
• 1 x Delphi Square Chrome Shower Arm 321mm
• 1 x Delphi Slim Rectangular Chrome Slider Rail Shower Kit (inc Wall Outlet Elbow)

Shower Valve Features

• Two-handle shower valve, including the concealing plate and valve body in one package
• Two outlets with an integrated diverter, feeding the fixed head or the handset on its rail
• Two controls: one sets the temperature, the other turns the shower on and switches between outlets
• Thermostatic cartridge holds your set temperature to within 2 degrees C
• TMV2 approved, so the flow shuts off if the cold supply fails
• WRAS approved for connection to the mains water supply
• Quarter turn ceramic disc cartridge, highly resistant to limescale
• 215mm x 120mm plate, fitted portrait or landscape, needing a recess 72mm to 85mm deep
• 15mm inlets, working from a minimum of 0.5 bar
• Chrome finish, matched across every piece in the bundle

Fixed Shower Head and Arm Features

• 200mm x 200mm square spray face with crisp right angled corners
• Stainless steel, which will not rust or tarnish in a shower enclosure
• Chamfered, knife thin plate edge that makes the head look thinner from below
• Flexible silicone nozzles set in a regular grid, rubbed clean by hand
• Single function spray on a 1/2 inch BSP swivel connector
• Matching square arm projecting 321mm from the finished wall on a 51mm square flange

Slide Rail Kit Features

• 700mm rail, projecting only 70mm from the wall for a tight enclosure
• Handset slides and locks at any height along the bar
• Single function rectangular handset with a flat, easy clean spray face
• 1500mm flexible shower hose
• Wall outlet elbow included, connecting the kit straight to the concealed valve
• Brass and ABS construction
• 5 year guarantee across the bundle against faulty workmanship and materials, with 12 months on serviceable and moving parts

Important Information

• This is a two-outlet shower valve designed for two accessories only (both are included).