Delphi Nectar Chrome Triple Concealed Shower Set with Fixed Head and Handset
This Nectar bundle is a two-outlet triple concealed shower in chrome, with a three-handle thermostatic valve, a 200mm square fixed head on a 321mm square arm and a slim rectangular slide rail kit. The temperature is set from the centre handle and each outlet has its own on-off control.
The plate stretches to 280mm to carry the extra square handle, and the head and rail keep the same crisp lines. It is built for a bathroom where the overhead and the handset are wanted at the same time rather than one at a time. Valve, head, arm, rail kit and wall outlet elbow are supplied together for one price.
Bundle Contents
- 1 x Delphi Nectar Chrome 2-Outlet Triple Concealed Shower Valve
- 1 x Delphi Square Chrome Fixed Shower Head 200mm x 200mm
- 1 x Delphi Square Chrome Shower Arm 321mm
- 1 x Delphi Slim Rectangular Chrome Slider Rail Shower Kit (inc Wall Outlet Elbow)
Shower Valve Features
- Three-handle shower valve, including the concealing plate and valve body in one package
- Two outlets, each with its own control, run on their own or both together
- Three controls: the centre one sets the temperature, the outer two each open one outlet
- Thermostatic cartridge holds your set temperature to within 2 degrees C
- TMV2 approved, so the flow shuts off if the cold supply fails
- WRAS approved for connection to the mains water supply
- Quarter turn ceramic disc cartridge, highly resistant to limescale
- 280mm x 120mm plate, fitted portrait or landscape, needing a recess 72mm to 85mm deep
- 15mm inlets, working from a minimum of 0.5 bar
- Chrome finish, matched across every piece in the bundle
Fixed Shower Head and Arm Features
- 200mm x 200mm square spray face with crisp right angled corners
- Stainless steel, which will not rust or tarnish in a shower enclosure
- Chamfered, knife thin plate edge that makes the head look thinner from below
- Flexible silicone nozzles set in a regular grid, rubbed clean by hand
- Single function spray on a 1/2 inch BSP swivel connector
- Matching square arm projecting 321mm from the finished wall on a 51mm square flange
Slide Rail Kit Features
- 700mm rail, projecting only 70mm from the wall for a tight enclosure
- Handset slides and locks at any height along the bar
- Single function rectangular handset with a flat, easy clean spray face
- 1500mm flexible shower hose
- Wall outlet elbow included, connecting the kit straight to the concealed valve
- Brass and ABS construction
- 5 year guarantee across the bundle against faulty workmanship and materials, with 12 months on serviceable and moving parts
Important Information
- This is a two-outlet shower valve designed for two accessories only (both are included).
