Delphi Nectar Chrome Triple Concealed Shower Set with Fixed Head and Slide Rail Kit

Delphi Nectar Chrome Triple Concealed Shower Set with Fixed Head and Handset

This Nectar bundle is a two-outlet triple concealed shower in chrome, with a three-handle thermostatic valve, a 200mm square fixed head on a 321mm square arm and a slim rectangular slide rail kit. The temperature is set from the centre handle and each outlet has its own on-off control.

The plate stretches to 280mm to carry the extra square handle, and the head and rail keep the same crisp lines. It is built for a bathroom where the overhead and the handset are wanted at the same time rather than one at a time. Valve, head, arm, rail kit and wall outlet elbow are supplied together for one price.

Bundle Contents

• 1 x Delphi Nectar Chrome 2-Outlet Triple Concealed Shower Valve
• 1 x Delphi Square Chrome Fixed Shower Head 200mm x 200mm
• 1 x Delphi Square Chrome Shower Arm 321mm
• 1 x Delphi Slim Rectangular Chrome Slider Rail Shower Kit (inc Wall Outlet Elbow)

Shower Valve Features

• Three-handle shower valve, including the concealing plate and valve body in one package
• Two outlets, each with its own control, run on their own or both together
• Three controls: the centre one sets the temperature, the outer two each open one outlet
• Thermostatic cartridge holds your set temperature to within 2 degrees C
• TMV2 approved, so the flow shuts off if the cold supply fails
• WRAS approved for connection to the mains water supply
• Quarter turn ceramic disc cartridge, highly resistant to limescale
• 280mm x 120mm plate, fitted portrait or landscape, needing a recess 72mm to 85mm deep
• 15mm inlets, working from a minimum of 0.5 bar
• Chrome finish, matched across every piece in the bundle

Fixed Shower Head and Arm Features

• 200mm x 200mm square spray face with crisp right angled corners
• Stainless steel, which will not rust or tarnish in a shower enclosure
• Chamfered, knife thin plate edge that makes the head look thinner from below
• Flexible silicone nozzles set in a regular grid, rubbed clean by hand
• Single function spray on a 1/2 inch BSP swivel connector
• Matching square arm projecting 321mm from the finished wall on a 51mm square flange

Slide Rail Kit Features

• 700mm rail, projecting only 70mm from the wall for a tight enclosure
• Handset slides and locks at any height along the bar
• Single function rectangular handset with a flat, easy clean spray face
• 1500mm flexible shower hose
• Wall outlet elbow included, connecting the kit straight to the concealed valve
• Brass and ABS construction
• 5 year guarantee across the bundle against faulty workmanship and materials, with 12 months on serviceable and moving parts

Important Information

• This is a two-outlet shower valve designed for two accessories only (both are included).