Delphi Port Brushed Brass Bath Shower Mixer Tap with Kit
The bath shower mixer keeps the twin pillars and stepped blade spout of the Port bath filler and adds the shower kit: a slimline pencil handset, a flexible hose and a round wall bracket, all fed through a small diverter set into the deck between the two pillars. Switch the diverter over and the water leaves the spout and goes to the handset instead, which is what turns a bath into somewhere you can rinse hair off or clean the tub down after use. The handles are the same quarter turn blade levers on ceramic discs, and the handset, hose and bracket are finished to match the tap rather than being a chrome afterthought. It is a brass-bodied tap with an ABS handset, and it wants 2.0 Bar to run properly - a mains pressure or pumped supply, not a gravity tank. Brushed brass runs warm satin gold from the tap right through the hose to the handset, which is what makes the kit read as one piece.
Product Features
- Deck mounted bath shower mixer for a two tap hole bath, supplied complete with shower kit
- Shower kit comprises a slimline pencil handset, a flexible hose and a wall bracket to park the handset on
- Deck-mounted diverter between the pillars switches the flow from the bath spout to the handset and back
- Twin round pillars with flat blade levers and a stepped blade spout, matching the bath filler and the two basin mixers in the Port range
- 180mm hole centres and a low 119mm height suit standard UK bath drillings, with a 113mm spout reach and 3/4 inch BSP tails
- Brushed brass finish across the tap, hose, bracket and handset - a warm satin gold that suits white baths and darker tiling
- Quarter turn ceramic disc valves - a short, positive movement from off to full, with no washers to wear out
- Brass tap body with an ABS handset, keeping the part you hold light in the hand
- Backed by a 5 year manufacturer guarantee (subject to terms)
Important Information
- Bath waste not supplied - several options are available separately
