Delphi Quay Chrome High Rise Tall Mono Basin Mixer Tap
A countertop basin sits on the vanity rather than in it, which lifts the rim well above the height a standard tap can clear. The Quay high rise mono basin mixer is built for that: a 293mm column with the spout 237mm above the deck and reaching 151mm forward, so the water lands towards the middle of the bowl instead of on the near edge. The body is the same undecorated cylinder used across the Quay range, with a stick lever laid flat along the top and the spout finished with an angled cut, in a chrome finish. Ceramic disc valves keep the single lever light through its travel, and a 0.2 bar minimum means it is not restricted to mains pressure homes.
Product Features
- Single lever high rise basin mixer for a one tap hole countertop or vessel basin
- Extra column height gives the spout clearance over a bowl that sits on top of the vanity unit
- Plain round body and slim stick lever handle, with a tube spout cut at an angle at the outlet
- Polished chrome finish, the easiest of the three to match to existing brassware and to wipe clean
- 293mm tall with a 151mm spout reach and 237mm from base to spout outlet
- Ceramic disc valves for a light lever action and long-term sealing
- Brass body with 1/2 inch BSP inlet connections
- Runs from 0.2 bar, so it suits gravity-fed as well as mains pressure systems; 9.8 litres per minute at 1.0 bar
- Standard height basin mixer, bath filler and bath shower mixer available across the Quay range in all three finishes
- 5 year manufacturer guarantee (subject to terms)
Important Information
- Basin waste is not supplied - choose a slotted or unslotted waste to suit your basin separately
