Delphi Quay Chrome Bath Filler Tap
Two pillars, a straight spout bridging between them, and nothing else on show - the Quay bath filler is a deck mounted two tap hole filler drilled at 180mm hole centres, so check that against the holes in your bath before ordering. Each pillar carries its own stick lever running on a quarter turn, which takes hot and cold from closed to fully open in one short movement rather than several twists. The spout sits low at 119mm with a 115mm reach and ends in the same angled cut used on the Quay basin mixers, in a chrome finish. With 3/4 inch BSP inlets and 23.1 litres per minute at 1.0 bar it fills at a rate you can walk away from, though it does need that 1.0 bar to do it.
Product Features
- Deck mounted bath filler for a two tap hole bath, with a bridging spout between twin pillars
- Quarter turn stick lever on each pillar, controlling hot and cold separately
- Polished chrome finish, the easiest of the three to match to existing brassware and to wipe clean
- 119mm tall with a 115mm spout reach, 78mm from base to spout outlet and 180mm hole centres
- Ceramic disc valves for a light lever action and long-term sealing
- Brass body with 3/4 inch BSP inlet connections
- Matching basin mixer, high rise basin mixer and bath shower mixer available across the Quay range in all three finishes
- 5 year manufacturer guarantee (subject to terms)
Important Information
- Bath waste and overflow are not supplied - several options are available separately
