Delphi Sedona Brushed Brass 3-Hole Wall Mounted Basin/Bath Mixer Tap

Delphi Sedona Brushed Brass 3-Hole Wall Mounted Basin/Bath Mixer Tap

Fixing to the wall rather than the basin, this three-piece brushed brass set puts two crosshead handles on round back plates with a tubular spout between them, cranked over at the end so the water drops straight down. The 200mm projection is what makes it work above a countertop bowl, since the outlet clears the rim instead of fighting it, and with nothing mounted on the basin itself there is no tap ledge to wipe around. Worth planning the pipe runs before the plaster goes on.

Chrome and matt black versions are made to the same dimensions.

Product Features

• Three-hole wall mounted mixer for a basin or small bath, valves concealed behind the wall
• Spout projects 200mm from the wall, clearing the rim of a countertop bowl
• Two crosshead handles on round back plates either side of the spout
• Cranked spout end directs water straight down rather than across the bowl
• PVD coated brushed brass for a durable finish that resists tarnishing and scratching
• Quarter turn ceramic discs, so a small movement takes you from off to full
• Solid brass body weighing 2.1kg, built for a long service life
• Works from 0.1 bar, suiting gravity-fed tanks as well as mains pressure
• 12 litres per minute at 0.5 bar, rising to 27 at 3 bar
• WRAS approved under number 2204064, meeting UK water supply regulations
• Guarantee: 3 years, with 12 months on serviceable moving parts

Important Information

• A waste is not included with this tap and must be ordered separately.