Delphi Sedona Chrome Pillar Mounted Bath Filler Tap

Delphi Sedona Chrome Pillar Mounted Bath Filler Tap

Two round chrome pillars rise from the bath deck, one carrying each crosshead handle, with the spout arcing over between them to 311mm and reaching 183mm out. That height is deliberate. It gives you room to hold a jug or a shower head under the outlet, and it keeps the arc visible above the rim of a modern straight bath. The 180mm centres match the standard two-hole drilling, so on most baths it is a straight swap.

Matt black and brushed brass are made in the same shape if you want a stronger accent.

Product Features

• Deck mounted bath filler for a bath drilled with two holes at 180mm centres
• Chrome arch rising 311mm above the deck with a 183mm spout reach
• Crosshead handles turn a quarter turn from closed to fully open
• Polished chrome that matches most bath screens, wastes and shower fittings
• 3/4 BSP inlet connections, sized for the flow a bath needs
• Ceramic disc cartridges give precise control with no washers to wear out
• Solid brass body weighing 3kg, made to survive constant heat cycling
• Runs from 0.2 bar, low enough for a gravity-fed hot water tank
• Fills at 29 litres per minute at 0.5 bar and 48 at 2 bar
• WRAS approved to UK water supply regulations, approval number 2204060
• Guarantee: 5 years, with 12 months on serviceable moving parts