Delphi Windsor Crosshead Chrome 3-Hole Wall Mounted Basin Mixer Tap

Delphi Windsor Crosshead Chrome 3-Hole Wall Mounted Basin Mixer Tap

Three chrome wall plates and nothing on the basin rim: this one splits into two separate handle assemblies and a spout, all fixed to the wall above the basin. The spout tapers out 180mm and finishes in an open trough end that lays the water down flat rather than firing it. Each handle sits on a hexagonal collar standing proud of its round plate, giving a faceted Edwardian joint with six flat sides.

The connections sit behind the wall, so it suits a job where the pipework is being planned rather than a straight swap.

Product Features

• Wall mounted basin mixer using three wall outlets, spout and two separate handles
• Tapered spout projecting 180mm with an open trough end that spreads the flow
• Body sits only 55mm proud of the finished wall
• Ball-tipped crosshead handles with white ceramic hot and cold indices
• Hexagonal collars beneath the crossheads, reading Edwardian rather than high Victorian
• Bright chrome finish that suits white basins and darker tiled walls alike
• Ceramic disc valves seal without washers, so nothing inside wears out and drips
• Solid brass build weighing 1.7kg, giving a durable core that lasts
• Works from 0.1 bar, so gravity-fed tanks suit it as well as combi systems
• Delivers 19.3 litres per minute at 0.5 bar, rising to 47.8 at 3 bar
• Guarantee: 5 years, with 12 months on serviceable moving parts

Important Information

• A waste is not included with this tap and must be ordered separately.