Honeywell DT92E1000 Wireless Digital Eco Room Thermostat

Product Features

• Energy saving TPI control performance
• Simple user interface with large high contrast display and easy-to-read characters
• Display shows room temperature, with option to inquire about setpoint
• 5 degree C to 35 degree C setpoint range with 0.5 degree C increments, using ? and ?buttons
• Off/standby button, allowing manual switch off, with frost protection active
• Adjustable off/standby setpoint 5 degree C to 16 degree C or DT92 can be set to off completely
• Simple battery change by unclipping front cover
• 5 A resistive, 3 A inductive switch rating
• Relay switching box is 230Vac mains powered with 24-230Vac SPDT potential-free contacts
• Display shows countdown of time remaining in ECO energy saving mode
• Manual override possible at relay box
• Setpoint limits can be programmed in
• Special 'fail-safe' mode, should RF communications be temporarily lost
• NVRAM storage of setup parameters, ensuring these are never lost
• RF link between units is pre-set at the factory
• Transmission and signal strength test features to guarantee good room thermostat placement
• 2-way RF communications at 868MHz radio frequency band, giving typical reliable range of 30m in houses
• CE mark, complying with standards
• EN60730-1 (2001), EN60730-2 9 (2002), EN55014-1 (2006), EN55014-2 (1997), ETSI EN300 220-3, ETSI EN301 489-3
• Supplied with a 1 year guarantee from the manufacturer