Verona Rivenza Gunmetal Bath Filler Tap

Verona Rivenza Gunmetal Bath Filler Tap

The quickest way to judge a bath filler is by the wait it leaves you with, and the Rivenza deck-mounted filler keeps it short - flowing at 10.7 litres per minute at 1.0 bar and up to 19.3 litres per minute at 3.0 bar. Twin round pillars with slim quarter-turn levers give independent control of hot and cold, meeting in a low, gently curved central spout, finished in moody gunmetal, a deep charcoal take on modern brassware. It mounts through two standard tap holes on the bath rim and keeps a low 149mm profile that suits a modern bathroom.

Product Features

• Two-tap-hole deck-mounted bath filler with independent hot and cold lever controls
• Round-bodied pillar design with slim levers and a curved central spout
• Gunmetal finish - a moody, contemporary alternative to chrome with a deep charcoal tone
• Quarter-turn ceramic disc valves - smooth, precise control with no rubber washers to wear, so no drips down the line
• Low 149mm profile with a 118.9mm spout reach over the bath rim
• Fills at 10.7 litres per minute at 1.0 bar, rising to 19.3 litres per minute at 3.0 bar
• Requires a minimum of 1.0 bar water pressure - best suited to combi boilers and pressurised (unvented) systems; gravity-fed systems will usually need a pump
• Solid brass body construction for lasting everyday use
• Standard UK 1/2 inch BSP inlet connections
• Part of the Verona Rivenza collection - matching basin mixers and a bath shower mixer version are available in five finishes