Verona Rovio Chrome Pillar Mounted Bath Filler Tap
Running a bath is easier when hot and cold each have their own control, and that is exactly how the Rovio bath filler is arranged: two polished chrome pillars, a flat lever on each, and a low central spout that pours cleanly between them. Each lever runs on a quarter-turn ceramic disc valve, so finding your preferred mix is a small, precise movement rather than a winding action - and because the discs replace rubber washers entirely, there is nothing inside to wear down and start dripping. The cylindrical bodies and soft-edged levers match the rest of the Rovio collection, so it pairs naturally with the Rovio basin mixer; if you would rather have a handset over the bath, the Rovio bath shower mixer adds one to the same design. It mounts through two tap holes on standard 3/4" BSP connections, standing 159mm tall with a 128mm spout reach.
Product Features
- Pillar mounted bath filler for baths with two tap holes, on standard 3/4" BSP connections
- Twin flat lever handles - independent hot and cold control for precise temperature mixing
- Quarter-turn ceramic disc valves - a short, light action with no rubber washers to wear or drip
- Modern design of round cylindrical bodies with a straight, low-profile central spout
- Solid brass construction with a polished chrome finish
- 159mm overall height with a 128mm spout reach and 98mm from base to spout
- Best suited to mains-pressure plumbing - combi boiler or unvented (pressurised) systems
- Part of the Verona Rovio collection - matching basin mixer and bath shower mixer available
- Requires a minimum water pressure of 1.0 bar - traditional gravity-fed (tank and cylinder) systems will usually need a pump to achieve this
