Verona Velora Matt Black Bath Filler Tap

Verona Velora Matt Black Bath Filler Tap

Few parts of a bathroom are judged as impatiently as a filling bath, and the Velora bath filler answers with 30.5 litres a minute on a 2 bar system - rising to 37.4 at 3 bar. Two round pillars stand on the bath deck, each crowned with a diamond-knurled knob, with a flat blade of a spout bridging between them. Each knob controls hot or cold independently through a precise quarter turn on ceramic discs, and the matt black finish turns the whole geometry into a graphic silhouette against white acrylic and tilework.

Product Features

• Two-hole, pillar-mounted bath filler with independent hot and cold controls
• Twin round pillars topped with diamond-knurled knobs, bridged by a squared blade-style spout
• Graphic matt black finish over a solid brass body
• Quarter-turn ceramic disc valves give precise, drip-free control with no rubber washers to wear out
• Generous fill rate: 21.6 litres per minute at 1 bar, 30.5 at 2 bar and 37.4 at 3 bar
• Requires a minimum of 1.0 bar water pressure - well suited to combi boiler and pressurised (unvented) systems; older gravity-fed systems may need a pump
• Standard 1/2 inch BSP connections for baths with two tap holes
• 184mm tall with a 111.5mm spout reach and 102mm from base to spout
• Prefer a handset for rinsing? The Velora bath shower mixer adds a diverter and shower kit, and matching basin mixers complete the set