Accents Fluted Brushed Brass Wet Room Screen with Hinged Return (inc Slate Grey Tray)
The Accents walk-in enclosure benefits from 2 showstopping features that bring traditional elegance into the modern era, namely fluted glass and a brushed brass colour scheme. This layout of the enclosure includes a fixed front panel and hinged return panel to aid with water deflection. The coordinating brushed brass accessories and privacy of the fluted glass are not the only features to be found, however; each screen measures 1950mm high x 8mm thick, whilst the main fixed screen comes coated in an easy-clean treatment.
This bundle includes an eye-catching grey slate effect shower tray, offering a quality upgrade on a typical white finish. Standing at just 40mm tall, the tray is suitable for installing flat on the floor, raised up on a plinth (sold separately), or even built into the floor to create a full level access wet room.
Bundle Contents
- 1 x Delphi Accents Fluted Glass Front Panel 1950mm (H)
- 1 x Delphi Accents Brushed Brass Concealed Hinged Return Fluted Glass Panel 330mm (W)
- 1 x Brushed Brass Wall Channel/Profile
- 1 x Brushed Brass Wall Mounted Support Arm
- 1 x Pearlstone Grey Slate Effect Rectangular Shower Tray
- 1 x Delphi AquaStone 90mm Shower Waste with Brushed Brass Cover
Wet Room Glass Features
- Corner or alcove walk-in consisting of 1 x front panel and 1 x hinged return panel
- Art Deco-inspired fluted glass design adds additional privacy and a touch of elegance
- Manufactured from 8mm toughened safety glass
- Front screen and return panel both measure 1950mm high (excluding shower tray)
- Main screen coated with NanoShield easy-clean protective formula on one side
- Colour-coordinated fittings feature a high-end and luxurious brushed brass effect finish
- Reversible layout - entry position can be on the left or the right when viewed from the front
- Support arm measures approx 1m in length and can be cut down to suit different enclosure depths
- Lifetime guarantee provided by the manufacturer
Shower Tray Features
- Constructed from a polyurethane resin mixed with volcanic ash filler (mineral stone resin)
- Grey textured slate effect finish creates a luxurious aesthetic inspired by nature
- Low profile - 40mm step-in height if installed flat on the floor
- Suitable for inset (level access) or floor mounted (low profile) installation as standard
- Suitable for raised height installation with the addition of an easy-plumb riser kit (sold separately)
- Manufactured in Britain to ensure high quality
- Supplied with a 90mm fast-flow shower waste with colour-coordinating brushed brass cover
- Tray benefits from a lifetime manufacturer guarantee (terms and conditions apply)
Important Information
- A compatible easy-plumb riser kit is available separately - it adds approximately 105mm to the height of the installation
