Delphi Axiom Crosshead Brushed Brass Basin Mixer and Bath Filler Tap Set (inc Press Top Waste)

Delphi Axiom Crosshead Basin Mixer and Bath Filler Tap Set - Brushed Brass

Axiom Crosshead pairs a tall arched spout with crossheads of four slim pin spokes ending in flat discs: the traditional hot-and-cold layout, drawn with a lighter, modern hand. As a set it gives basin and bath the same handles and the same swivel spout, without the fuss of Victorian detailing. Both taps run happily on low pressure, and the set comes in chrome, matt black and brushed brass.

Bundle Contents

• 1 x Mono Basin Mixer Tap with Press Top Waste - Brushed Brass (AXC-BAS-BR)
• 1 x Bath Filler Tap - Brushed Brass (AXC-BF-BR)

Basin Mixer Features

• Mono basin mixer for a single tap hole, supplied with a matching press-top waste
• Arched swivel spout 217mm high with a 134mm reach over the bowl
• Two crossheads of four pin spokes with flat disc ends, hot and cold set separately
• Quarter turn ceramic disc cartridges, precise to set and resistant to drips
• Works from 0.1 bar, so it suits gravity-fed tanks as well as combis
• Brushed brass finish on both taps, so basin and bath match

Bath Filler Features

• Pillar mounted bath filler for a bath drilled with two tap holes at 180mm centres
• Arched swivel spout 319mm high with a 175mm reach, turning aside as you step in
• Around 40 litres per minute at 1 bar, so a standard bath fills in a few minutes
• Works from 0.2 bar, suiting gravity-fed and pressurised systems alike
• Quarter turn ceramic disc valves for a short, positive turn
• Guarantee: 3 years on both taps, with 12 months on serviceable moving parts

Important Information

• A matching press-top waste is supplied for the basin; a bath waste is not included.