Delphi Corinthian Brushed Brass Bath Filler Tap
The Delphi Corinthian Bath Filler Tap is a two tap hole deck mounted filler: a pair of upright pillar handles on 180mm centres, bridged by a straight round body with a short spout that drops the water into the bath. Each handle moves a quarter turn from closed to fully open, working ceramic discs rather than washers, so there is no rubber to perish and start weeping. It passes 23.3 litres per minute at 1.0 bar and 34.2 at 2.0 bar, which is proper filling speed rather than a trickle. Brushed brass gives a warm, softly matt gold along the edge of a white bath. The 1.0 bar minimum does mean it is aimed at mains pressure plumbing.
Product Features
- Two tap hole deck mounted bath filler with a pair of lever handles on 180mm centres
- Quarter turn ceramic disc valves - a short, precise movement from off to full flow, with no washers to wear out
- 119mm overall height, 116mm spout reach and 43mm from the deck up to the spout outlet, keeping it low against the bath rim
- Brushed brass finish - a warm, muted gold with a soft sheen rather than a mirror shine
- Delivers 23.3 litres per minute at 1.0 bar, rising to 34.2 litres per minute at 2.0 bar
- Solid brass construction, weighing 1.5kg, with 3/4 inch BSP inlet connections - the standard UK bath tap size
- Minimum 1.0 bar working pressure: suited to combi boilers and unvented cylinders, while a gravity fed tank would need a pump
- Separate hot and cold handles give you direct control of the mix as the bath fills
- Matching basin mixer, tall basin mixer and bath shower mixer with kit available in the Corinthian range, all in chrome, brushed brass and matt black
- 5 year manufacturer guarantee against faulty workmanship and materials (subject to terms)
Important Information
- Bath waste not supplied - a bath waste and overflow to suit your bath is needed separately, with several options available
