Delphi Dive Chrome Mono Basin Mixer Tap
The Dive mono basin mixer is easy to pick out of a line-up: a thin blade lever lies flat across a rounded collar, and the spout runs out as a broad, flat-topped blade that finishes in an open scoop rather than a closed nozzle. The body is a soft rectangular column, lightly waisted at the front, standing on a slim rounded backplate that keeps the basin ledge clear. Polished chrome catches the light along the flat top surfaces and the squared shoulders, and reads cleanly against white ceramic and almost any tiling. A matching press top waste is supplied in the box, so there is nothing else to order to finish the installation, and the single lever runs on a ceramic disc cartridge - it sets temperature and flow together in one movement and has no rubber washer to wear into a drip. At 160mm high with a 110mm spout reach it is sized for a standard countertop or semi-recessed basin, and a 0.2 bar minimum means it will run on a gravity-fed tank as readily as on a combi.
Product Features
- Single lever mono basin mixer supplied with a matching press top waste
- Flat blade lever handle over a rounded collar, with a wide blade spout that opens into a scoop at the tip
- Soft rectangular body on a slim low-profile backplate, 160mm high with a 110mm spout reach
- Polished chrome finish over a solid brass body
- Ceramic disc cartridge for smooth single-handed control, with no washer to wear and drip
- Works from 0.2 bar, so it suits gravity-fed tank systems as well as combi and pressurised supplies
- Delivers 7.9 litres per minute at 0.5 bar and 11.4 litres per minute at 1 bar
- 1/2 inch BSP inlets for a standard UK single tap hole basin
- Matching high rise tall basin mixer, bath filler and bath shower mixer available across the Dive range, each in chrome, brushed brass and matt black
- Covered by a 5 year manufacturer guarantee (subject to terms)
