Delphi Edge Chrome Mono Basin Mixer Tap (inc Press Top Waste)

Delphi Edge Chrome Mono Basin Mixer Tap (inc Press Top Waste)

Everything on this mixer is drawn with a set square. The body is a plain rectangular column, the spout a flat blade that runs straight out and stops with a small radius, and the lever a wide rectangle laid across the top. Bright chrome sharpens all of it, picking out the edges where the faces meet. It stands 160mm high with a 110mm reach, which clears the rim of most pedestal and inset vanity basins comfortably.

A matching press-top waste is supplied, and the tap needs only one tap hole.

Product Features

• Mono basin mixer for a single tap hole, supplied with a matching press-top waste
• Rectangular column body 160mm tall with a flat blade spout reaching 110mm
• Wide rectangular lever across the top for one-handed temperature and flow control
• Bright chrome that picks out every edge and wipes clean with a damp cloth
• Sized to clear the rim of a pedestal, semi-pedestal or inset vanity basin
• Single lever ceramic cartridge, with hard discs in place of perishable washers
• Brass body weighing 2.08kg, built for years of daily use
• Works from 0.2 bar, so gravity-fed tanks and combis are both fine
• WRAS approved, so it meets the UK water supply regulations
• Gives 7.9 litres per minute at 0.5 bar, rising to 20.1 at 3 bar
• Guarantee: 5 years, with 12 months on serviceable moving parts

Important Information

• A matching press-top waste is included, so no separate waste is needed.