Delphi Dive Matt Black Mono Basin Mixer Tap
The Dive mono basin mixer is easy to pick out of a line-up: a thin blade lever lies flat across a rounded collar, and the spout runs out as a broad, flat-topped blade that finishes in an open scoop rather than a closed nozzle. The body is a soft rectangular column, lightly waisted at the front, standing on a slim rounded backplate that keeps the basin ledge clear. The matt black is flat and graphic, so the tap is read as an outline rather than a reflection, which is why it stands out most against white ceramic and pale worktops. A matching press top waste is supplied in the box, so there is nothing else to order to finish the installation, and the single lever runs on a ceramic disc cartridge - it sets temperature and flow together in one movement and has no rubber washer to wear into a drip. At 160mm high with a 110mm spout reach it is sized for a standard countertop or semi-recessed basin, and a 0.2 bar minimum means it will run on a gravity-fed tank as readily as on a combi.
Product Features
- Single lever mono basin mixer supplied with a matching press top waste
- Flat blade lever handle over a rounded collar, with a wide blade spout that opens into a scoop at the tip
- Soft rectangular body on a slim low-profile backplate, 160mm high with a 110mm spout reach
- Matt black finish over a solid brass body
- Ceramic disc cartridge for smooth single-handed control, with no washer to wear and drip
- Works from 0.2 bar, so it suits gravity-fed tank systems as well as combi and pressurised supplies
- Delivers 7.9 litres per minute at 0.5 bar and 11.4 litres per minute at 1 bar
- 1/2 inch BSP inlets for a standard UK single tap hole basin
- Matching high rise tall basin mixer, bath filler and bath shower mixer available across the Dive range, each in chrome, brushed brass and matt black
- Covered by a 5 year manufacturer guarantee (subject to terms)
