Delphi Edge Brushed Pewter Basin Mixer and Bath Filler Tap Set (inc Press Top Waste)

Delphi Edge Basin Mixer and Bath Filler Tap Set - Brushed Pewter

Edge is drawn with a set square: rectangular bodies, flat blade spouts and wide lever blades, with crisp lines where the faces meet. Buying the basin mixer and bath filler together keeps those straight lines identical at both ends of the bathroom, and they sit naturally with square basins, rectangular baths and large-format tiles. The set comes in five finishes, from chrome and matt black to brushed brass, bronze and pewter.

Bundle Contents

• 1 x Mono Basin Mixer Tap with Press Top Waste - Brushed Pewter (EDG-BAS-PW)
• 1 x Bath Filler Tap - Brushed Pewter (EDG-BF-PW)

Basin Mixer Features

• Mono basin mixer for a single tap hole, supplied with a matching press-top waste
• Rectangular column 160mm tall with a flat blade spout reaching 110mm
• Wide rectangular lever across the top for one-handed flow and temperature
• Single lever ceramic disc cartridge, with hard discs in place of perishable washers
• Works from 0.2 bar, suiting gravity-fed tanks as well as combi systems
• Brushed pewter finish on both taps, so basin and bath match

Bath Filler Features

• Pillar mounted bath filler for a bath drilled with two tap holes at 180mm centres
• Square pillars with blade levers, joined by a wide flat spout reaching 110mm
• The wide spout spreads the flow into a broad sheet rather than a noisy jet
• Quarter turn ceramic disc valves, a short turn from off to full flow
• Needs 1 bar, so a combi or unvented cylinder suits; a gravity system needs a pump
• Guarantee: 3 years on both taps, with 12 months on serviceable moving parts

Important Information

• A matching press-top waste is supplied for the basin; a bath waste is not included.