Delphi Turbine Chrome Basin Mixer and Bath Filler Tap Set (inc Press Top Waste)

Delphi Turbine Basin Mixer and Bath Filler Tap Set - Chrome

Turbine's handles are small valve wheels, four flat spokes inside a knurled rim, and they give a bathroom the look of an old pump room or a warehouse conversion. This set puts the same wheels on the basin mixer and the bath filler, so the industrial idea runs the length of the room instead of stopping at one tap. Both taps are happy on low pressure, and the set comes in chrome, matt black and brushed brass.

Bundle Contents

• 1 x Mono Basin Mixer Tap with Press Top Waste - Chrome (TRB-BAS-CP)
• 1 x Bath Filler Tap - Chrome (TRB-BF-CP)

Basin Mixer Features

• Mono basin mixer for a single tap hole, supplied with a matching press-top waste
• Arched spout 219mm tall reaching 134mm, so the water lands in the middle of the bowl
• Twin wheel handles with open spokes and knurled rims that grip even with wet hands
• Quarter turn ceramic disc valves, hot and cold set separately
• Works from 0.1 bar, so gravity-fed tanks are fine as well as combis
• Chrome finish on both taps, so basin and bath match

Bath Filler Features

• Pillar mounted bath filler for a bath drilled with two tap holes at 180mm centres
• Arched spout standing 319mm high with a 175mm reach, high enough to fill a bucket
• Around 40 litres per minute at 1 bar, filling a standard bath in a few minutes
• Works from 0.2 bar, suiting gravity-fed tanks and pressurised systems alike
• Quarter turn ceramic disc valves, with no washers inside to perish
• Guarantee: 5 years on both taps, with 12 months on serviceable moving parts

Important Information

• A matching press-top waste is supplied for the basin; a bath waste is not included.