Delphi Edge Brushed Brass 2-Hole Wall Mounted Basin Mixer Tap (inc Backplate)

Delphi Edge Brushed Brass 2-Hole Wall Mounted Basin Mixer Tap (inc Backplate)

A brushed brass blade projecting from a tiled wall is a strong piece of detailing, and here it runs 175mm out over the basin with a single upright lever alongside. Both sit on a rectangular backplate with softened corners, so the brass reads as one continuous shape rather than two separate fittings. The soft golden tone works particularly well over a coloured or stone basin.

Only 70mm of the assembly stands proud of the wall face.

Product Features

• Two-hole wall mounted basin mixer, supplied with a backplate covering the wall openings
• Flat blade spout projecting 175mm from the wall, with an upright lever alongside
• Backplate with softened corners ties spout and lever into one continuous shape
• Warm brushed brass with a soft golden tone that suits coloured and stone basins
• PVD coated for a durable brushed brass appearance that resists tarnishing and scratching
• Stands only 70mm proud of the wall, leaving the basin surface entirely clear
• Single lever ceramic cartridge for smooth blending and long-term drip resistance
• Brass body weighing 2.04kg, made to take daily use for years
• Works from 0.2 bar, so gravity-fed tanks are as workable as a combi
• WRAS approved, so it meets the UK water supply regulations
• Guarantee: 3 years, with 12 months on serviceable moving parts

Important Information

• A waste is not included with this tap and must be ordered separately.